53081-2003-110 Utility 80' 1 1/2" Self-Priming Flexible Impeller Pump 110volt/1 phase/50Hz a.c.

 

53081-2003-110
£ 770.99 ex. VAT
 
Utility 80' 1 1/2" Self-Priming Flexible Impeller Pump 110volt/1 phase/50Hz a.c.
110volt/1 phase/50Hz IP55 Electric Motor, Nitrile oil-resistant impeller.

  • Connections: 1 1/2" BSP internal threaded ports
  • Dimensions: 330mm long, 250mm wide, 240mm high
  • Output: up to 80 litres/minute at 3m head. Max. differential pressure 1.6bar
  • Built-in dry-running protection for up to 30 minutes after initial prime
  • Rapid self-priming from dry up to 3m
  • Will handle hard or soft solids
  • Corrosion resistant bronze body, stainless steel shaft
  • Carbon-ceramic mechanical shaft seal
  • Simple, fully serviceable design with few wearing parts
  • Packaged Dimensions: L:36.00 x H:30.00 x W:30.00cm
  • Actual Weight: 26.08 Kg  (Approx. 28.08 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
SERVICE KIT
£98.39 ex. VAT
Vacuum switch
£60.02 ex. VAT
Full Parts List

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW - bag of 3 screws
End Cover screws
4
Checking...
£ 5.39
2END COVER
97mm diameter, 4 holes, stainless steel
1
Checking...
£ 24.27
3O RING - 3 pieces per pack1
Checking...
£ 10.78
4IMPELLER-NITRILE1
Checking...
£ 72.78
5WEARPLATE1
Checking...
£ 10.67
6Click here to enquire about this part.1
7SCREW1
Checking...
£ 4.00
8CAM1
Checking...
£ 14.84
9Click here to enquire about this part.1
10SEAL ASSY1
Checking...
£ 66.69
12Click here to enquire about this part.4
13Click here to enquire about this part.4
14Click here to enquire about this part.1
15Click here to enquire about this part.1
SERVICE KIT
Contains - Impeller, Seal, 'O' Ring & End Cover Screws
1
Checking...
£ 98.39